Appraisal Values
The initial average appraisal value, calculated by combining data from all first and third-party repairable vehicle appraisals uploaded through Mitchell systems in Q1 2017, was $3,018, $4 less than this same period last year. However, continued development suggests a final Q1 2017 average appraisal value of $3,047, which represents an increase of the same quarter last year.
Comprehensive Losses
In Q1 2017, the average initial gross appraisal value for comprehensive coverage estimates processed through our servers was $3,018, compared to $2,966 in Q1 2016. Factoring for development produces an increase in the adjusted value to $3,059.
Collision Losses
Mitchellâs Q1 2017 data reflects an initial average gross collision appraisal value of $3,327, $41 less than this same period last year. Continued development suggests a final Q1 2017 average gross collision appraisal value of $ 3,367, nearly equivalent to the same quarter last year.
Third-Party Property Damage
In Q1 2017, our initial average gross third-party property damage appraisal was $2,805 compared to $2,768 in Q1 2016, reflecting a $37 initial increase between these respective periods. Factoring for development yields an anticipated Q1 2017 adjusted appraisal value of $ 2,822, a $54 increase in average severity over Q1 2016.
Supplements
In Q1 2017, 40.66% of all original estimates prepared by Mitchell-equipped estimators were supplemented one or more times. In this same period, the pure supplement frequency (supplements to estimates) was 65.41%, reflecting a 3.24 point increase from that same period in 2016. The average combined supplement variance for this quarter was $869.58, $2.01 lower than in Q1 2016.
Average Appraisal Make-Up
This chart compares the average appraisal make-up as a percentage of dollars, constructed by Mitchell-equipped estimators. These data points reflect a âtrade offâ; in comparing Q1 2017 to the same period last year, there was only minimal shifting (less than 1%) between categories.
Parts Analysis Parts Type Definitions
Original Equipment Manufacturer (OEM)
Parts produced directly by the vehicle manufacturer or their authorized supplier, and delivered through the manufacturerâs designated and approved supply channels. This category covers all automotive parts, including sheet metal and mechanical parts.
Aftermarket
Parts produced and/or supplied by firms other than the Original Equipment Manufacturerâs designated supply channel. This may also include those parts originally manufactured by endorsed OEM suppliers, which have later followed alternative distribution and sales processes. While this part category is often only associated with crash replacement parts, the automotive aftermarket also includes a large variety of mechanical and custom parts.
Non-New/Remanufactured
Parts removed from an existing vehicle that are cleaned, inspected, repaired and/or rebuilt, usually back to the original equipment manufacturerâs specifications, and re-marketed through either the OEM or alternative supply chains. While commonly associated with mechanical hard parts such as alternators, starters and engines, remanufactured parts may also include select crash parts such as urethane and TPO bumpers, radiators and wheels.
Recycled
Parts removed from a salvaged vehicle and re-marketed through private or consolidated auto parts recyclers. This category commonly includes all types of parts and assemblies, especially body, interior and mechanical parts.
Original Equipment Manufacturer (OEM) Parts Use in Dollars
In Q1 2017, OEM parts represented 63.58% of all parts dollars specified by Mitchell-equipped estimators. This represents a 1.85% relative decrease from Q1 2016.
Aftermarket Parts Use in Dollars
In Q1 2017, 21.52% of all parts dollars recorded on Mitchell appraisals were attributed to Aftermarket sources, up 2.87 points from Q1 2016.
Remanufactured Parts Use in Dollars
Listed as âNon-Newâ parts in our estimating platform and reporting products, Remanufactured parts represent 4% of the average gross parts dollars used in Mitchell appraisals during Q1 2017. This reflects a 0.81% relative decrease over this same period in 2016.
Recycled Parts Use in Dollars
Recycled parts constituted 10.9% of the average parts dollars used per appraisal during Q1 2017, reflecting a 0.22% decrease from Q1 2016.
The Number of Parts by Part Type
In order to capture another aspect of parts use, we calculate the number of parts used by part type on a repairable estimate. In comparing Q1 2017 to the same quarter in 2016, aftermarket parts usage increased to an average 2.54 parts per estimate. At the same time, new OEM, Remanufactured, and Recycled parts usage experienced decreases.
Paint and Materials
During Q1 2017, Paint and Materials made up 10.16% of our average appraisal value, representing a 0.08% relative decrease from Q1 2016. Represented differently, the average paint and materials rateâachieved by dividing the average paint and materials allowance per estimate by the average estimate refinish hoursâyielded a rate of $33.74 per refinish hour in this period, compared to $33.47 in Q1 2016.
Adjustments
In Q1 2017, the percentage of adjustments made to estimates was down compared to the same period last year. The frequency of betterment taken decreased by 10%, while the average dollar amount of the betterment taken dropped by 4% to $127.42. Appearance allowance frequency increased by 4%, while the dollar amount of that appearance allowance decreased to $212.06.
Labor Analysis
For 2017 year-to-date, average body labor rates rose in all but one of the survey states compared to 2016.